Laser Engravers & Cutters

The best Creality Falcon laser engravers in 2026

All ten current Creality Falcon lasers ranked by use case, using independent tests and official prices on 31 October 2026.

Updated October 31, 2026 · 10 picks

We may earn a commission when you buy through links on this page. It never changes our scores. Learn more

Best overall

Creality Falcon2 Pro (22W / 40W)

Enclosed 40W with a 400 × 415 mm bed for $1,349.

8.3 $1,349 Best for: Home workshops and small businesses that want cutting power with an enclosure

Fully enclosed, FDA Class 1, with lid interlock, fire, tilt and dirty-lens sensors
40W cuts plywood, walnut and acrylic quickly; 22W Precise mode for detail
Large 400 × 415 mm work area

No autofocus: you set focus by hand
Camera placement was about 5 mm off in The Gadgeteer’s test

Check price at Creality Falcon Read full review

Easiest to use

Creality Falcon A1 Pro

Autofocus, camera and touchscreen; cuts up to about 6 mm.

8.3 $1,099 Best for: Beginners and crafters who want a safe, smart enclosed laser

Autofocus and HD camera with on-screen placement
Fully enclosed with flame detection and tilt/drop stop
20W diode cut 6 mm plywood cleanly (TechRadar)

10 mm basswood did not cut through in 7 passes (CNX Software)
Smaller 358 × 268 mm work area and limited height under the head

Check price at Creality Falcon Read full review

Best for beginners

Creality Falcon A1C

Enclosed from $269; ideal for coasters and gifts.

7.9 $369 Best for: Beginners and gift makers who want a small, safe laser on a desk

Fully enclosed Class 1 from $269
Lifting platform gives 148 mm of clearance for taller objects
10W cut 5 mm basswood in one pass (3DPrinting.com)

Small 150 × 150 mm work area
Head doesn’t lift after focusing; it jammed on a bowl

Check price at Creality Falcon Read full review

Best for thick cuts

Creality Falcon2 Pro 60W

19 mm plywood in one slow pass.

7.8 $1,899 Best for: Small businesses cutting thick wood and acrylic every week

Three power modes (22 / 40 / 60 W) in one head
MakerHacks cut 19 mm plywood in one pass at 2 mm/s
Bundled 1.6 W module for fine engraving

Thin, flexible acrylic top panel and wobbly slats (Tom’s Hardware)
Rolling lid can stick; no pass-through slot

Check price at Creality Falcon Read full review

Best for metal and production

Creality Falcon T1

Modular galvo with fibre, diode, MOPA and UV.

8.4 $2,249 Best for: Small businesses making personalised metal, wood and acrylic products

Swappable fibre, diode, MOPA and UV modules, tool-free in about 15 seconds
Galvo speed: up to 10,000 mm/s line speed
Fibre module marked three aluminium dog tags in 1 min 32 s (CNX Software)

Small 175 × 175 mm work area
Extra modules are expensive ($809–$3,059 each)

Check price at Creality Falcon Read full review

Best open-frame

Creality Falcon2 22W

4.6/5 from 3DWithUs, $549.

8.0 $549 Best for: Hobbyists who want detail and solid cutting in an open-frame laser

Four 6W diodes combined into a fine 0.08 × 0.1 mm spot
3 mm basswood and leather cut in one pass at 600 mm/min
Colour engraving on stainless steel

Open frame: needs goggles, ventilation and a fire-safe surface
No autofocus

Check price at Creality Falcon Read full review

Best enclosed bed under $600

Creality Falcon A1 (10W)

381 × 305 mm, arrives assembled.

7.7 $549 Best for: Beginners who want an enclosed laser for wood, leather and acrylic

Arrives fully assembled; running in under an hour
Enclosed with interlocks on both covers
Generous 381 × 305 mm bed for its size

10W cannot engrave bare metal or cut foil
Rarely reaches its 600 mm/s speed in real jobs

Check price at Creality Falcon Read full review

Most power per dollar

Creality Falcon2 40W

40W for $639, but open-frame.

7.8 $639 Best for: Experienced makers with a ventilated workshop who want maximum cutting per dollar

40W diode for $639 (down from $1,319)
Creality rates it for 20 mm cork and 0.15 mm stainless steel in one pass
Large 400 × 415 mm bed with integrated air assist

Open frame: needs goggles, an enclosure or a dedicated room
No motorised Z-axis or autofocus

Check price at Creality Falcon Read full review

Best budget

Creality CR-Laser Falcon 10W

Big bed and fine spot for $205.

7.4 $205 Best for: Budget hobbyists engraving wood, leather and paper

$205, down from $489 at launch
Fine 0.06 × 0.08 mm spot for detailed engraving
Large 400 × 415 mm work area

8 mm wood needed two passes (Make Tech Easier)
Minimal safety features; open frame

Check price at Creality Falcon Read full review

Cheapest

Creality CR-Laser Falcon 5W

$119 to learn engraving.

7.0 $119 Best for: First-time users who want to learn laser engraving cheaply

Only $119 on the official store
Fine 0.06 mm spot for detailed engraving
Easy assembly, about 30 minutes, tools included

Cuts wood only up to about 5 mm (Tom’s Hardware)
Minimal safety features; open frame

Check price at Creality Falcon Read full review